BCGXJ - VYNA-BOND ADHESIVE
- MSDS: BCGXJ
- Manufacturer: PDI INC
- Product Name: VYNA-BOND ADHESIVE
- National Stock Number: 8040-00N001049
Product Identification
Product ID:VYNA-BOND ADHESIVE
MSDS Date:01/01/1985
FSC:8040
NIIN:00N001049
MSDS Number: BCGXJ
Responsible Party
BLAINE, MN 55434
US
Cage: 0B629
Contractor
Telephone: 612-785-2156
Cage: 0B629
Ingredients
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: 80 - 85%
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
TETRAHYDROFURAN (SARA III)
CAS: 109-99-9
RTECS: LU5950000
Fraction By Weight: 2.5%
OSHA PEL 200 PPM/250 STEL
ACGIH TLV: 200 PPM/250STEL;9192
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
CYCLOHEXANONE (SARA III)
CAS: 108-94-1
RTECS: GW1050000
Fraction By Weight: 2.5%
OSHA PEL S, 50 PPM
ACGIH TLV: S, 25 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
NON-VOLATILE CONTENT (RESINS)
Fraction By Weight: 15%
Hazards
Effects of
Overexposure:SKIN/EYE:IRRITATION.INHALATION:DIZZINESS,HEADACHE,NAUS
EA,LACK OF COORDINATION,LACK OF CONSCIOUS.
First Aid
First Aid:INHALATION:REMOVE TO FRESH AIR GIVE ARTIF.RESP.IF BREATH HAS
STOPPED.INGESTION:GIVE 1-2 GLASSES OF WARM MILK,INDUCE
VOMITING.CALL PHYSICAN IMMEDIATELY.SKIN/EYE:FLUSH WITH WATER.SEE
DR.
Fire Fighting
Flash Point:25F (TOC)
Lower Limits:1.8
Upper Limits:11.5
Extinguishing Media:CO*2,DRY CHEMICAL,ALCOHOL FOAM
Fire Fighting Procedures:DO NOT EXTINGUISH WITH H*2O
Unusual Fire/Explosion Hazard:CONTAINER MAY EXPLODE IF EXPOSED TO
EXCESSIVE HEAT/OR OPEN FLAME
Accidental Release
Spill Release Procedures:FLUSH W/WATER.AVOID FLUSHING INTO CONFINED
AREAS.WEAR RESPIRATORY PROTECTION.
Handling
Handling and Storage Precautions:VERY FLAMMABLE.PREVENT SKIN CONTACT TO
AVOID DEFATTING ACTION.
Other Precautions:USE NORMAL GOOD PERSONAL HYGIENE.
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED BREATH DEVICE IN ACCORD WITH
EXPOSU OF CONCERN
Ventilation:LOCAL EXHAUST
Protective Gloves:POLYETHYLENE
Eye Protection:CHEM GOGGLES
Other Protective Equipment:RUBBER OR POLYETHYLENE APRON
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:174F/79C
Vapor Pres:70
Vapor Density:2.5
Spec Gravity:0.80
Evaporation Rate & Reference:4.6(BUTYL ACETATE)
Solubility in Water:APPRECIABLE
Appearance and Odor:MILKY-CLEAR SYRUPY LIQUID W/PUNGENT MEK ODOR
Percent Volatiles by Volume:85
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:SPARKS,OPEN FLAMES
Disposal
Waste Disposal Methods:FLUSH W/WATER,CONTROLLED BURNING.FEDERAL,STATE
AND LOCAL LAWS APPLY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.